Lotus heat transfer presses

Pneumatic press with two printing plates for large runs of sportswear and workwear. While one garment is being pressed, you prepare the next. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Two freestanding printing plates: only the part to be printed rests on the plate, so earlier prints are not affected.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the garment smooth before the print is applied.
• Interchangeable printing plates and a cap set as options. Mikanit 2.0 heating technology has heating rods that can be replaced one by one.

Transfer area

2 plates, each 40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

78 × 94 × 72 cm

Dimensions open (D × W × H)

78 × 94 × 72 cm

The same press as the LTS 750, with a base that gives more room so that bags are easier to print. Two printing plates and up to 8 bar. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The base leaves more free space under the printing plates, so bags and other bulky items can be loaded without folding.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the item smooth before the print is applied.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

78 × 94 × 72 cm

Dimensions open (D × W × H)

78 × 94 × 72 cm

Pneumatic press with an extra-large 75 × 50 cm area for bulky sportswear and sublimation, such as floor mats and ChromaLuxe panels. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The heating plate swings aside for a clear view of the whole area.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the garment smooth before the print is applied.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

75 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2800 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

80 × 82 × 72 cm

Dimensions open (D × W × H)

140 × 106 × 72 cm

Semi-automatic press with two printing plates for fast runs of T-shirts, sleeves, trousers, bags and caps.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens automatically.
• The heating plate swings between the two printing plates so you can prepare the next garment while the first is pressed.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• Freestanding printing plates that change without tools. A cap set and plates in several sizes are available as options.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

85 × 101 × 69 cm

Dimensions open (D × W × H)

81 × 101 × 96 cm

Manual press with two printing plates. While one garment is being pressed, you prepare the next, giving a faster flow in larger runs.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The heating plate swings between the two printing plates and leaves the other one free for the next garment.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plates: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

88 × 101 × 67 cm

Dimensions open (D × W × H)

80 × 101 × 90 cm

Press for marking size 4 and 5 balls with names, numbers or the team crest.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Semicircular heating and printing plates hold the ball firmly in place while pressing.
• Works with ready-made plastisol transfers and thick heat transfer vinyls such as Siser Hi-5.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set steplessly.
• Digital display for time and temperature, with a sound and light signal when it is time to open.

Transfer area

Ball sizes 4 and 5

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

900 W

Voltage

220 – 240 V

Press for caps, beanies and hats. Handles heat transfer vinyl, plastisol prints, embroidered badges and rhinestones.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing unit moves forwards and backwards to fit caps with different crown heights.
• Version 2.0 is improved so that pressing leaves no pressure marks.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set by hand.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Switches to an energy-saving mode after 30 minutes without use.

Transfer area

14.5 × 9 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

250 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

39 × 23 × 70 cm

Dimensions open (D × W × H)

39 × 23 × 80 cm

Large-format press for sublimation on large textiles and hard substrates such as ChromaLuxe panels. Requires a compressor and 380 V.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plate pulls out, so you can position material and motifs comfortably outside the press.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs, a counter and a pre- and post-pressing function.
• A lower heating plate is available as an option on request.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

160 × 100 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

11100 W

Voltage

380 V

Contact pressure

0 – 400 g/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

160 × 162 × 150 cm

Dimensions open (D × W × H)

255 × 162 × 150 cm

Closed with safety guard (D × W × H)

160 × 175 × 150 cm

Open with safety guard (D × W × H)

255 × 175 × 150 cm

Manual all-round press for T-shirts, sweatshirts, trousers, bags and caps. With interchangeable printing plates, one press handles many different garments.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

58 × 40 × 68 cm

Dimensions open (D × W × H)

80 × 40 × 126 cm

Manual all-round press for T-shirts, sweatshirts, trousers, bags and caps. With interchangeable printing plates, one press handles many different garments.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

50 × 40 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

58 × 52 × 68 cm

Dimensions open (D × W × H)

80 × 52 × 126 cm

Manual swing-away press for T-shirts, sweatshirts, bags, caps and sublimation. The heating plate swings aside so you can see the whole garment when placing the print.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The heating plate swings fully away from the printing plate. This makes it easier to load the garment and position the print correctly.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

120 × 57 × 60 cm

Dimensions open (D × W × H)

96 × 88 × 90 cm

Manual swing-away press for T-shirts, sweatshirts, bags, caps and sublimation. The heating plate swings aside so you can see the whole garment when placing the print.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The heating plate swings fully away from the printing plate. This makes it easier to load the garment and position the print correctly.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

125 × 57 × 60 cm

Dimensions open (D × W × H)

96 × 90 × 90 cm

Manual press with two printing plates. While one garment is being pressed, you prepare the next, giving a faster flow in larger runs.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The heating plate swings between the two printing plates and leaves the other one free for the next garment.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plates: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing. Pressure is set steplessly with a dial.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

88 × 100 × 67 cm

Dimensions open (D × W × H)

78 × 100 × 90 cm

Small, handy press for small logos and name labels, for example on breast pockets, sleeves and shoes. Also suited for small sublimation items and rhinestones.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set by hand.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Available on request with heating plates both above and below, often used for rhinestones.

Transfer area

13 × 12 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

250 W

Voltage

220 – 240 V

Small, handy press for small logos and name labels, for example on breast pockets, sleeves and shoes. Also suited for small sublimation items and rhinestones.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• The pressure arm locks itself during pressing and a spring lifts the heating plate when you release it. Pressure is set by hand.
• Digital display for time and temperature, with a sound and light signal when it is time to open.
• Available on request with heating plates both above and below, often used for rhinestones.

Transfer area

25 × 12 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

375 W

Voltage

220 – 240 V

Semi-automatic swing-away press for sportswear, T-shirts, trousers, bags, caps and sublimation. The press opens and swings aside by itself when the time is up.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens and swings aside automatically.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

90 × 52 × 65 cm

Dimensions open (D × W × H)

120 × 86 × 92 cm

Semi-automatic swing-away press for sportswear, T-shirts, trousers, bags, caps and sublimation. The press opens and swings aside by itself when the time is up.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens and swings aside automatically.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Freestanding printing plate: only the part to be printed rests on the plate, so earlier prints and double fabric layers leave no marks.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

90 × 52 × 65 cm

Dimensions open (D × W × H)

123 × 89 × 92 cm

Semi-automatic press with a pull-out printing plate for sportswear, T-shirts, trousers, bags, caps and sublimation. The press opens automatically when the time is up.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens automatically.
• The printing plate pulls out, so you can see the whole area and change garments comfortably.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

97 × 47 × 66 cm

Dimensions open (D × W × H)

112 × 47 × 112 cm

Semi-automatic press with a pull-out printing plate for sportswear, T-shirts, trousers, bags, caps and sublimation. The press opens automatically when the time is up.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens automatically.
• The printing plate pulls out, so you can see the whole area and change garments comfortably.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• The printing plates change quickly without tools. A cap set and plates in several sizes are available as options.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

97 × 48 × 66 cm

Dimensions open (D × W × H)

115 × 48 × 112 cm

Semi-automatic press with two printing plates for fast runs of T-shirts, sleeves, trousers, bags and caps.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• You pull down the lever and an electromagnet keeps the plate locked under pressure. When the time is up, a signal sounds and the plate opens automatically.
• The heating plate swings between the two printing plates so you can prepare the next garment while the first is pressed.
• Three time and temperature programs can be saved, for example for flock, flex and sublimation.
• Freestanding printing plates that change without tools. A cap set and plates in several sizes are available as options.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 38 × 45 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 – 240 V

Dimensions closed (D × W × H)

85 × 100 × 69 cm

Dimensions open (D × W × H)

79 × 100 × 96 cm

Pneumatic press for sportswear, workwear and sublimation. High, even pressure of up to 8 bar gives consistent results even in large runs. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the garment smooth before the print is applied.
• The heating plate opens at a wide angle, so you can see the whole area and stay clear of the hot plate.
• Interchangeable printing plates and a cap set as options. Mikanit 2.0 heating technology has heating rods that can be replaced one by one.

Transfer area

40 × 50 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2000 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

85 × 67 × 72 cm

Dimensions open (D × W × H)

117 × 100 × 72 cm

Pneumatic press for sportswear, workwear and sublimation. High, even pressure of up to 8 bar gives consistent results even in large runs. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the garment smooth before the print is applied.
• The heating plate opens at a wide angle, so you can see the whole area and stay clear of the hot plate.
• Interchangeable printing plates and a cap set as options. Mikanit 2.0 heating technology has heating rods that can be replaced one by one.

Transfer area

45 × 60 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2500 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Pneumatic press with two printing plates for large runs of sportswear and workwear. While one garment is being pressed, you prepare the next. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Two freestanding printing plates: only the part to be printed rests on the plate, so earlier prints are not affected.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the garment smooth before the print is applied.
• Interchangeable printing plates and a cap set as options. Mikanit 2.0 heating technology has heating rods that can be replaced one by one.

Transfer area

2 plates, each 45 × 60 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2500 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

85 × 96 × 72 cm

Dimensions open (D × W × H)

85 × 96 × 72 cm

The same press as the LTS 760, with a base that gives more room so that bags are easier to print. Two printing plates and up to 8 bar. Requires a compressor.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The base leaves more free space under the printing plates, so bags and other bulky items can be loaded without folding.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs and a counter that keeps track of the number of prints.
• Pre- and post-pressing, for example to press the item smooth before the print is applied.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

2 plates, each 45 × 60 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

2500 W

Voltage

220 V

Contact pressure

1.2 – 1.5 kg/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

85 × 96 × 72 cm

Dimensions open (D × W × H)

85 × 96 × 72 cm

Large-format press for sublimation on large textiles and hard substrates such as ChromaLuxe panels. Requires a compressor and 380 V.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plate pulls out, so you can position material and motifs comfortably outside the press.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs, a counter and a pre- and post-pressing function.
• A lower heating plate is available as an option on request.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

100 × 90 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

6000 W

Voltage

380 V

Contact pressure

0 – 400 g/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

155 × 102 × 150 cm

Dimensions open (D × W × H)

250 × 102 × 150 cm

Closed with safety guard (D × W × H)

155 × 115 × 150 cm

Open with safety guard (D × W × H)

250 × 115 × 150 cm

Large-format press for sublimation on large textiles and hard substrates such as ChromaLuxe panels. Requires a compressor and 380 V.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plate pulls out, so you can position material and motifs comfortably outside the press.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs, a counter and a pre- and post-pressing function.
• A lower heating plate is available as an option on request.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

130 × 90 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

8100 W

Voltage

380 V

Contact pressure

0 – 400 g/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

155 × 132 × 150 cm

Dimensions open (D × W × H)

250 × 132 × 150 cm

Closed with safety guard (D × W × H)

155 × 145 × 150 cm

Open with safety guard (D × W × H)

250 × 145 × 150 cm

Large-format press for sublimation on large textiles and hard substrates such as ChromaLuxe panels. Requires a compressor and 380 V.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plate pulls out, so you can position material and motifs comfortably outside the press.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs, a counter and a pre- and post-pressing function.
• A lower heating plate is available as an option on request.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

130 × 100 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

8100 W

Voltage

380 V

Contact pressure

0 – 400 g/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

160 × 132 × 150 cm

Dimensions open (D × W × H)

255 × 132 × 150 cm

Closed with safety guard (D × W × H)

160 × 145 × 150 cm

Open with safety guard (D × W × H)

255 × 145 × 150 cm

Large-format press for sublimation on large textiles and hard substrates such as ChromaLuxe panels. Requires a compressor and 380 V.

Manufacturer’s warranty: 2 years on the press and 10 years on the heating system.

• The printing plate pulls out, so you can position material and motifs comfortably outside the press.
• Pressing starts at the push of a button. The plate lowers, locks and lifts automatically when the time is up.
• Three saved programs, a counter and a pre- and post-pressing function.
• A lower heating plate is available as an option on request.
• Mikanit 2.0 heating technology gives fast heat-up and an even temperature. The heating rods can be replaced one by one.

Transfer area

160 × 90 cm

Timer

0 – 999 s

Temperature

0 – 250 °C

Heating output

11100 W

Voltage

380 V

Contact pressure

0 – 400 g/cm² or 2.5 – 8 bar

Dimensions closed (D × W × H)

155 × 162 × 150 cm

Dimensions open (D × W × H)

250 × 162 × 150 cm

Closed with safety guard (D × W × H)

155 × 175 × 150 cm

Open with safety guard (D × W × H)

250 × 175 × 150 cm